There are a bunch of esr meter in the market, some of them are good, some of them are bad or average and some of them are the real best of the best. Its quite a bit challenge though to find the best esr meter.
But the thing is people love to read and listen to recommendations, reviews, and what other people are using and talking about. Here we have listed the best selling esr meter for you and along with you will know the real user’s feedback, the verified purchase from Amazon.
Here are the top 3 esr meter
Top 10 Best Esr Meter
1. Signstek MESR-100 V2 Auto Ranging in Circuit ESR LCR Meter Capacitor/Low Ohm Meter Up to 0.01 to 100R, Support in Circuit Testing
- Using true 100 KHz sine wave to measure the ESR value, which is equal to the testing method of capacitor manufacturer.
- Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.
- Measuring range from 0.001 to 100.0R, support IN CIRCUIT Testing.
- Auto-ranging capacitor ESR and Low Ohm Meter.
- Wide Measurement Range
2. DE-5000 Handheld LCR Meter
- This LCR Meter is a 19999/ 9999 counts dual display, high accuracy LCR meter, which could measure Inductance/ Capacitance/ Resistance with secondary parameters including dissipation factor (D), quality factor (Q), phase angle , equivalent series/ parallel resistance (ESR or Rp).
- This LCR Meter is fully auto ranging operation for AC impedance & DC resistance measurement. The user could measure the L/C/R components directly in “AUTO-LCR “ smart mode without selecting the function key.
- Components could be measured in serial or parallel mode according to the DUT (device under test) impedance automatically.User could select the desired test frequencies of 100Hz/120Hz/1kHz/10kHz /100kHz.
- The “Sorting”mode could help the user to make a quick sort for a bunch of components.
- Standard Accessories: English PDF manual, DC9V Battery, Alligator test lead case(TL-21), SMD Tweezers case(TL-22), Guard Line(TL-23),,,,, Option: IR to USB cace *It isn’t included.
3. GME Professional in Circuit ESR Capacitor Tester, Capacitance Meter, Designed and Engineered in the USA
- 【DESIGNED AND ENGINEERED IN THE USA】 GME Professional in Circuit ESR capacitor tester designed and supported in the USA; compare to most other ESR meters on the market that are generic private label import with unknown manufacturer and no support or warranty
- 【ACCURATE MICROPROCESSOR CONTROLLED】 Microprocessor generated 100 kHz output test frequency and low 15 mVp-p output test voltage that will not turn on any solid state devices during testing, critical for accurate test result in circuitry with active components
- 【INTELLIGENT DESIGN】 ESR capacitor tester automatically discharges capacitor under test; Audible buzzer announces ESR range during testing allows quick checking of entire PCB in seconds; Intelligent automatic calibration on power up, no manual zero needed unlike many other ESR meters
- 【WIDE RANGE IN-CIRCUIT ESR & DCR TESTING】 Tester meter measures ESR (equivalent Series Resistance) on capacitors range from 0.47µF to 2200µF, in or out of circuit
- 【EASY TO USE, PORTABLE, AND RUGGED DESIGN】 Easy One-Handed Tweezers with gold plated tips and extra-long cable; Non polarity dependent test probe, eliminates the need for polarity checking
4. BSIDE ESR02 PRO Digital Transistor SMD Components Tester Diode Triode Capacitance Inductance Multimeter ESR Meter
- [Wide Application]: It is very easy to test plug-in and SMD devices, it can also be used to test different kinds of triodes, thyristors, MOSFET, enable to analysis the device type, the polarity of the pin, the output HFE, the valve voltage, the junction capacitance of the FET.
- [Automatical Identification]: Intelligent transistor checker is able to detect NPN and PNP transistors, N-channel and P-channel MOSFET, diodes, thyristors, resistors, capacitors or other devices automatically.
- [Typical ESR Value Guide]: There is a table “typical ESR value of electrolytic capacitor” at the back, it is for guiding only, these are typical value for standard grade electrolytic capacitor at room temperature.
- [Easy to Use]: Our advanced electronic transistor tester owns auto shut-down function. Auto power off 20 seconds after measurement. Large LCD display with backlight function for easy reading.
- [Attention]: Be sure to discharge the capacitor before testing it, otherwise it may damage the internal circuit. It is powered by 1pcs of 9V 6LR61 battery, when the battery power is under 6V, please replace it with a new one. Choose DC 9V-12V adapter (including 9V and 12V) if using DC power supply.
5. B&K Precision 879B Dual Display Handheld Deluxe Universal LCR Meter with Backlit Display
- 40000 Counts resolution on primary and 10,000 counts resolution on secondary display
- L, C, R and Z primary Measurements; automatic calculation of secondary parameters D, Q, Theta, and ESR
- 0.5 Percent basic accuracy
- Relative mode; data hold and min/max/average recording
- 1 Year warranty
6. LCR Research Pro1 Plus – 100KHz LCR Meter with 0.1% Accuracy/LED Tester/ESR Meter/Smart SMD Tweezers
- Basic accuracy – R: 0.1%, L: 0.2%, C: 0.2% (see user manual for details)
- 5 test frequencies – 100Hz, 120Hz, 1kHz, 10kHz, 100kHz with 3 test voltage – 0.2Vrms, 0.5Vrms, 1.0Vrms
- Wide measurement range – R: 20mΩ to 10MΩ, C: 0.1pF to 10mF, L: 10nH to 1H
- Additional diode and LED testing function
- One year warranty, lifetime support
7. AITRIP LCR-T7 Transistor Tester TFT Diode Triode Capacitance Meter LCR ESR Meter for Measuring Triodes Diodes Resistors Capacitors, Inductors, Thyr
- This LCR-T7 Transistor Tester Built-in high capacity rechargeable lithium ion battery. Lithium ion battery voltage detection.
- Used to detect NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery etc
- Automatic detection of zener diode 0.01-30V, self test with automatic calibration
- The data code and infrared waveform will be displayed,when the detector is successfully decoded(tips:After detection, align the infrared remote control with the “IR” light, then press the button in the remote control)
- One key operation. Auto power off (timeout settable).
8. MESR-100 Capacitor Tester,Geevorks Circuit Tester Ohm Meter 0.001-100.0R with SMD Test Clip,Auto-Ranging Capacitor for Measuring Capacitance Resist
- This MESR-100 V2 auto-ranging capacitor ESR and low Ohm meter measuring range is 0.001-100.0R, support in circuit testing.
- It is the series resistance inside the capacitor, and 100kHz is used to remove the impedance 1/(2*pi*F*C). When the impedance becomes smaller, the real series resistance value can be measured to determine whether the capacitor is bad/damaged or in good condition.
- Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test.
- During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.【Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.】
- Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.Equipped with a SMD alligator clip for more accurately testing.
9. Hantek1833C Handeld 100kHz LCR Meter with Carry Case, 0.3/0.6 Vrms
- 100Hz/120Hz/400Hz/1kHz/4kHz/10kHz/40kHz/50kHz/75kHz/100kHz test frequency, 0.3/0.6 Vrms test level, 0.30% accuracy
- Primary L/C/R/Z, secondary X/D/Q/theta(P)/ESR
- 4/2/1 times/s measuring rate, manual/auto measurement, 3/5 terminal test lead
- Measurement range: 0-2000H(L), 0-20mF(C), 0-20M Omega(R); reset function: open/short circuit calibration; mode: series and parallel
- 2.8″ TFT HD LCD screen for dual display, long stand-by battery charged fully within 2 hrs
10. Siglent Technologies SDM3065X 6 ½ Digit Digital Multimeter, DMM
- 4.3” TFT-LCD, 480*272
- Real 6½ digits readings resolution (2,200,000 counts)
- Comes with easy,convenient and flexible any sensor measurement control software: EasyDMM
- Standard interfaces: USB Device, USB Host, LAN (Optional Accessories: USB-GPIB Adapter)
- DC Voltage: 200 mV – 1000 V, DC Current: 200 μA – 10 A, AC Voltage: True-RMS, 200 mV – 750 V, AC Current: True-RMS, 200 μA – 10 A.
The considerations to buy esr meter
Purchasing online is tricky but if the product is available on Amazon it’s a lot easier thing.
The features you want for esr meter
You purchase a product for a certain purpose, right? So, you should look that the product you are looking for should have that certain features and specifications.
Here we have compiled the features and specifications of and that fulfills your need and desire.
Quality
Make sure the product you grabbing has the market standard quality. How do you confirm? Read the product history, check the brand and read users’ feedback.
Here in this blog post, we accumulated some nice users’ feedback that might help you to decide on the best product around filled with quality.
Good quality products come with good brands and a good price, make sure the price is within your budget. Remember, it does not mean that products with a good price come with great quality but usually it does.
Authentic seller
The best way to buy a product is from an authentic seller.
An authentic seller is someone who sells their own products, not someone who resells other people’s products.
An authentic seller has a vested interest in the quality of their product, which means they will not resell a faulty or defective product.
Reliability
The reliability of a product depends on the quality of the product and its performance.
A reliable product can be trusted to work well for a long time.
It is important to buy a reliable product because it will not break down or need repair often, which prevents wasting money on repairs and replacements.
Conclusion:
After checking the list of esr meter and reading the real user’s feedback, I hope that you have some ideas on what you like to have. Hope you got your desired product and making a very good move to your home.
Leave a Reply